Series AT-ADPS ATEX/IECEx Approved Differential Pressure Switch

The ADPS in Flameproof ATEX/IECEx Enclosure

The Series AT-ADPS ATEX/IECEx Approved Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flameproof enclosures are available in aluminum and can include a glass window for viewing set point status on the adjustment knob.

Important notes for installation:
• Cables must be fitted through 1/2" NPT cable gland or ATEX/IECEx conduit (not supplied with instrument).
• Make sure after cabling to close tight cover and cable gland, in order to maintain IP66 rating.
• Open cover only after de-energizing instrument.
Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous areas.

Please see Series ADPS for non-ATEX/IECEx approved.

California Residents:  Click Here for Proposition 65 WARNING.

Product Applications

  • Hazardous area pressure switch
  • Air filter and ventilator monitoring
  • Ventilation duct monitoring
  • Industrial cooling circuits
  • Fan heater overheating protection
  • Fire-protection damper control
  • Heat exchanger frost protection

Models & Ordering

Shipping Information

All shipping times are dependent on product availability at time of shipment.

Although we make every effort to ensure a continuous supply of our products, occasional circumstances may force us to temporarily run out of a product, or have shipping delays. Should this occur, customers will be notified soon after placement of any orders for such products and, if applicable, items will be put on backorder. For orders requiring expedited shipment, our customer service team can be contacted to confirm product availability

Build Your Custom Part. Use our Product Configurator

Specifications

Service:
Air and non-combustible, compatible gases.
Wetted Materials:
Diaphragm material: Silicone; Housing material: Switch body: PA 6.6 and POM; Cover: Polystyrene; Brass or SS depending on pressure connections chosen.
Temperature Limits:
Process and ambient temperature from -4 to 185°F (-20 to 85°C) (Note: Product temperature limits differ from case).
Pressure Limits:
See pressure limit chart.
Switch Type:
SPDT.
Electrical Rating:
Standard: Max. 1.5 A @ 250 VAC, max. switching rate: 6 cycles/min.
Set Point Adjustment:
Hand knob on pressure switch inside case. (De-energize before opening case).
Mounting Orientation:
Vertically, with pressure connections pointing downwards.
Mechanical Working Life:
Over 106 switching operations.
Enclosure Rating:
IP66.
Housing Material:
Aluminum.
Finishing:
Texture epoxy coat RAL7015.
Process Connections:
1/8" NPT female brass (SS optional).
Electrical Connections:
Two 1/2" NPT female. Cable gland not included.
Weight:
10.4 lb (4.7 kg).
ATEX Certificate:
EPT 19 ATEX 3192 X.
Agency Approvals:
ATEX Compliant: CE 0477 EX II 2G Ex db IIC T5, T6 Gb -60°C ≤Ta ≤+50°C (T6) -60°C ≤Ta ≤+60°C (T5) II 2D Ex tb IIIC T75 °C Db IECEx Compliant: Ex db IIC T5, T6 Gb -60°C ≤Ta ≤+50°C (T6) -60°C ≤Ta ≤+60°C (T5) Ex tb IIIC T75°C Db.

Features

  • Flameproof enclosure with optional glass window and aluminum housing protects the device in hazardous areas while giving local visibility to set point status
  • Increased response time at low pressures with LD port configuration

Model Chart

     SERIES AT-ADPS PRESSURE SWITCH                  
     
     AT-101NA-ADPS-X-X-X-XXXX AT-ADPS PRESSURE SWITCH W/ ATEX ENCL
          
         1ST SYMBOL (1ST X) RANGE
           08     0.08 TO 1.20 INWC  &  (20 TO 300 PA)
           04     0.12 TO 1.61 INWC  &  (30 TO 400 PA)
           03     0.20 TO 2.01 INWC  &  (50 TO 500 PA)
           05     0.80 TO 4.01 INWC  &  (200 TO 1000 PA)
           06     2.01 TO 10.04 INWC &  (500 TO 2050 PA)
           07     4.00 TO 20.00 INWC &  (1000 TO 5000 PA)

         2ND SYMBOL (2ND X) CONNECTION
            2     M20 X 1.5
           
         3RD SYMBOL (3RD X) SWITCH CONTACTS
            N     UP TO 1.0 A (0.4) /250 VAC     

         4TH SYMBOL (4TH X) HOUSING COVER
            B     BLIND TOP COVER
            W     GLASS WINDOW
             
         5TH SYMBOL (5TH X) PORT/VALVE MATERIAL
            1     BRASS
            2     STAINLESS STEEL

         6TH SYMBOL (6TH X) PRORT/VALVE CONFIGURATION
            VSO   STANDARD PORT, NO VALVE
            VL0   LD PORT, NO VALVE
            
         7TH SYMBOL (7TH X) CABLE ENTRY
            12     1/2" NPT ANSI/ASME B1.20.1

Product Literature

Manuals

Catalog Pages

Approvals

Drawings

Photo Downloads

You must be logged in to view this content.
Click here to login to your account.

Product Reviews

Only registered users can write reviews. Please Sign in or create an account